High Lifter
Kawasaki Teryx Front Forward Offset Control Arms
Whether you ride in deep mud or over rocky trails, the need for stronger control arms with added ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and lack the added ground clearance needed for challenging trails. High Lifter has solved your problem by designing tough control arms, twice as strong as your stock arms, with the added ground clearance you need for all terrains and bigger tires.
Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, and visual appeal. Don’t be fooled with too much arch that puts your axles into greater risk of damage. Our precision manufacturing process ensures each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precision cut into the bracing.
Installation is made easy with our step by step and multi-image instructions. During installation, you can use stock bushings and ball joints for easy installation. Always check for bearings, bushings, ball joints, and brake wear before installation and replace if needed. We always recommend checking these parts before you start your installation to save time and get back on the trail sooner. See the Replacement Parts Tab to purchase replacement parts as needed.
Features:
- 25% larger than average stock arms - Crafted from 1 ¼” DOM steel
- Up to 2.5x the wall thickness of an average stock arms - .188” wall thickness
- Grease fittings included for most models
- Added ground clearance featuring bends that maximize clearance and axle protection
- Easy to install and maintain
- Limited Lifetime Warranty
Tire Fitment:
- Up to 31"
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
Note: This kit includes an optional front lift bracket for lifted and non-lifted vehicles.
Note: When purchasing High Lifter Front and Rear Arms a separate lift kit is not required. High Lifter Front and Rear Arms provide shock mounts for both lifted and non-lifted options.
VEHICLE FITMENT
- 2016 Kawasaki Teryx 800 4 LE
- 2016 Kawasaki Teryx 800 4
- 2016 Kawasaki Teryx 800 LE
- 2016 Kawasaki Teryx 800
- 2022 Kawasaki Teryx 800
- 2022 Kawasaki Teryx 800 4
- 2023 Kawasaki Teryx 800
- 2023 Kawasaki Teryx 800 4
- 2012 Kawasaki Teryx 750 4
- 2013 Kawasaki Teryx 750 4
- 2014 Kawasaki Teryx 800 LE 4
- 2014 Kawasaki Teryx 800 4
- 2012 Kawasaki Teryx 750 4 EPS
- 2013 Kawasaki Teryx 750 4 EPS
- 2014 Kawasaki Teryx 800
- 2014 Kawasaki Teryx 800 LE
- 2015 Kawasaki Teryx 800
- 2015 Kawasaki Teryx 800 LE
- 2015 Kawasaki Teryx 800 4
- 2015 Kawasaki Teryx 800 4 LE
- 2017 Kawasaki Teryx 800 4 LE
- 2017 Kawasaki Teryx 800 4
- 2017 Kawasaki Teryx 800 LE
- 2017 Kawasaki Teryx 800
- 2018 Kawasaki Teryx 800 4 LE
- 2018 Kawasaki Teryx 800 4
- 2018 Kawasaki Teryx 800 LE
- 2018 Kawasaki Teryx 800
- 2019 Kawasaki Teryx 800 4 LE
- 2019 Kawasaki Teryx 800 LE
- 2019 Kawasaki Teryx 800 4
- 2019 Kawasaki Teryx 800
- 2020 Kawasaki Teryx 800
- 2020 Kawasaki Teryx 800 LE
- 2020 Kawasaki Teryx 800 4
- 2020 Kawasaki Teryx 800 4 LE
- 2021 Kawasaki Teryx 800
- 2021 Kawasaki Teryx Camo
- 2021 Kawasaki Teryx 800 4
- 2021 Kawasaki Teryx 800 4 LE
- 2021 Kawasaki Teryx 800 4 Camo