Can Am Defender E-CLIK Active Pro Shock Package

From long days on the farm, to tight twisting trails, SDi E-CLIK’s electronic shock package for the Can-Am Defender makes it easy to dial in your suspension for the terrain you’re in or load you may have in the bed, taking your Defender to the next level. The E-CLIK Active Pro System is the ultimate in suspension performance.

• The E-CLIK ECU uses 12 inputs from multiple sensors, an industry leading 250 times per second to adjust each shock automatically based on terrain and driving conditions.
• 3 Modes – Allows adjustment to the base shock setting through the controller: Trail, Desert, Street
• Cab Mounted Touch Screen makes it easy to switch between modes or adjust settings of the system. Through the touch screen, you're able to adjust front and rear shocks separately, add rear load compensation, see the current shock settings, or dive into the Pro menu to make the set up your own.

Verified to Fit 23+ 65" Wide Can-Am Defender HD10 Limited & Lonestar Models. Please note: Upper A-Arms must have the relief/clearance below the shock mounting tabs as seen below:

For 2019-22 Models, requires stock arms from 2023 65" model with eyelet relief as seen above, or aftermarket arms.

Features:

• The E-CLIK ECU uses 12 inputs from multiple sensors, an industry leading 250 times per second to adjust each shock automatically based on terrain and driving conditions.
  
• Adjustments are made near instantly utilizing SDI’s patent pending E-Valve
  
• 3 Modes – Allows adjustment to the base shock setting through the controller.
• Trail – Excels in slower trail riding and rock crawling Giving a soft, comfortable ride without sacrificing body control.
• Desert– For when you need to turn it up a notch, Desert Mode focuses on handling, by reacting faster to terrain and driver input, sensing rough whooped out terrain and adjusting at the precise time.
• Street – Prioritizes composure, more damping at the right times for a composed ride and excellent feedback to the driver. More sensitive to driver inputs: braking, throttle, steering.
• The high accuracy, 8 Axis Inertia Measurement Unit is a advanced stand-alone unit, separate from the ECU circuit board.
• IP69K – E-CLIK utilizes rugged ECU, IMU, and sealed connectors to stand up to the harshest conditions.
• Independent Front and Rear Shock Adjustment
• Rear Load Compensation
• Real Time Displays
• Shock setting at all 4 corners.
• Vehicle Roll and Pitch
• Vehicle Speed (corrected for tire size

• Pitch Sensitivity
  
• Roll Sensitivity
  
• Turn Sensitivity
  
• Throttle Sensitivity
  
• Brake Sensitivity

About the 2.5" shocks:

Our 2.5” Piggyback shocks feature a bump zone within the shock for increased compression damping at the end of the stroke. The shock was designed with durability and performance in mind.

• 7/8ths shafts,
  
• Low Friction Seals and DU Piston Bushing,
• high-quality Teflon lined bearings.
• The shocks come sprung and prevalved by SDI to offer the best performance out of the box.

VEHICLE FITMENT

Can Am Defender

INSTALLATION

Installation Manual

VIDEOS