Polaris RZR Pro XP APEXX Front Lower Control Arms | High Lifter
Polaris RZR Pro XP APEXX Front Lower Control Arms | High Lifter
Polaris RZR Pro XP APEXX Front Lower Control Arms | High Lifter
Polaris RZR Pro XP APEXX Front Lower Control Arms | High Lifter
Polaris RZR Pro XP APEXX Front Lower Control Arms | High Lifter
Polaris RZR Pro XP APEXX Front Lower Control Arms | High Lifter
Polaris RZR Pro XP APEXX Front Lower Control Arms | High Lifter

High Lifter

Polaris RZR Pro XP APEXX Front Lower Control Arms

Sale price$459.95
No reviews
No reviews
SKU: HDFLA-RZRPRO-B1-BJI
Order Now
Color:

Color

Ball Joints:

Ball Joints

Quantity:

All new High Lifter APEXX Control Arms are stronger, adjustable and engineered for the most punishing terrain with 1.75” of additional ground clearance. Push your Polaris RZR PRO XP to the limits and tackle obstacles you couldn't before! Optional preinstalled ball joints.

Features:

  • Adjustable heat-treated collars for camber adjustability with a 1” thread
  • Heavy duty ball joint brackets to eliminate deformation issues, Keller ball joints compatible
  • Ladder bar compatible with the 1.5” ID clamps
  • Extreme duty 1.5” x .188” DOM steel construction
  • 1.75” of added ground clearance compared to OEM lower arm
  • Mounting accommodations for OEM brake lines using OEM tabs instead of P-clamps
  • Limited Lifetime Warranty (Excludes wearable items like bushings, bearings, cones, and heim joints)
  • Powder Coated
  • Custom Colors Available upon request. (Customer must provide paint code)

Heavy Duty Strength
High Lifter’s new heavy duty control arms add more support than factory. The upper control arms that come stock on a Polaris RZR PRO XP are more robust than the stock lower control arms, leaving the lower arms more vulnerable to damage. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a typical ride. High Lifter arms are constructed out of 1.5” DOM with .188 wall tubing. This is a 50% increase in size and a 70% increase in steel thickness for added durability and strength.

Built in Adjustability
The lower arms also feature an adjustability component in the bushing collars to eliminate premature wearing that can come from the addition of lift kits, portals, or larger tires. When the kit is set to the factory position, you have 3/8” of adjustability camber in and out. Heat treated and plated adjustable bushing collars allow you to be confident in the strength you’re adding to your ride. This kit comes packaged and preadjusted to the factory position, and factory bushings and caps should be used for installation.

Increased Ground Clearance
We maximized ground clearance by strategically arching the lower control arm with double and TRIPLE bends. This unique design allowed us to get an additional 1.75” of ground clearance to avoid impacting those nasty trail obstacles. These bends maintain the factory geometry, which helps reduce wear on components like axles and tie rods. Our forward arms allow you to run larger tires without a suspension lift.

Reinforced Ball Joints Brackets
Portals and large tires apply torque that can distort the ball joint bracket, leading to failure of the arms. With over 130% increase in the ball joint mounting area, we are helping to prevent breakdown or “egging” of the mounting bracket.

Tire Fitment: Up to 34.5"
Our tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.

Optional Preinstalled Ball Joints
High Lifter’s service team uses a hydraulic press to install the ball joint with the correct pressure and alignment, also making sure the clip is fully seated and secured. Purchasing control arms with the ball joints already installed adds to easy installation and prevents damage due to improper installation, which is not covered by High Lifter’s Lifetime Warranty.
The ball joints preinstalled in this kit are BJP-4.

VEHICLE FITMENT
  • 2020 Polaris RZR PRO XP
  • 2020 Polaris RZR PRO XP 4
  • 2020 Polaris RZR PRO XP 4 Premium
  • 2020 Polaris RZR PRO XP 4 Ultimate
  • 2020 Polaris RZR PRO XP Premium
  • 2020 Polaris RZR PRO XP Ultimate
  • 2021 Polaris RZR PRO XP 4 Premium
  • 2021 Polaris RZR PRO XP 4 Sport
  • 2021 Polaris RZR PRO XP 4 Ultimate
  • 2021 Polaris RZR PRO XP Premium
  • 2021 Polaris RZR PRO XP Sport
  • 2021 Polaris RZR PRO XP Ultimate
INSTALLATION

Instructions