Polaris General Glass Windshield | Heatercraft
Polaris General Glass Windshield | Heatercraft
Polaris General Glass Windshield | Heatercraft
Polaris General Glass Windshield | Heatercraft
Polaris General Glass Windshield | Heatercraft

Heatercraft

Polaris General Glass Windshield

$600.00
No reviews
No reviews
Order Now
Quantity:

Questions?
Click here to give us a call!
MON-FRI 9am to 5pm MST

Inner Demon Motorsports Polaris General vented glass windshield.   After much research and testing we have crafted our own "Premium" full glass windshield for the 2018+ Polaris General. Our design provides more viewable area than any other glass windshield on the market.  The sealable left and right vents help to keep positive air pressure inside the cab helping to reduce dust from being drawn into the cab.

Features:

  • Laser Cut Aluminum Frame with Black Powder coated Finish
  • ¼” DOT Laminated Safety Glass
  • Fixed Vents w/ Gray Powder coated Vent Frames
  • Gasketed rails for tight fit to the roll cage
  • Includes hole for a wiper (wiper not included)
  • Simple Installation

NOTE: ROUTE Protection Shipping Insurance MUST BE PURCHASED for all glass windshields. Glass windshields are shipped with all possible precautions but can still arrive broken. If ROUTE Protection is not purchased, Kombustion is NOT responsible for any damaged or lost glass windshields. We highly recommend examining your shipment immediately after being received. If there are any issues with your package, contact ROUTE Protection for further assistance.

VEHICLE FITMENT

Polaris General

INSTALLATION
Tools #10mm socket or wrench

1. Place the windshield on the frame and rest it on the lower dash mounts, so there is no visible gap between the gasket and the dash. 

2. Hand tighten the brackets onto the windshield frame first by threading on a few turns- then snap the bracket around the ProFit cage- DO NOT TIGHTEN.

3. Install all four brackets using the same process and tighten by threading the bolt so there is 1/8" (0.125") of thread protruding from the bracket nut. Do not over tighten.

NOTE: Polaris ProFit cages vary on width at the bottom of the windshield opening depending on model year, so you might have to loosen the two (each side) lower A-Pillar mounts and allign or trim the lower gasket so the windshield rests inside the cage.