Suspension

HALO LOCKERS Maverick X3 and Defender Locker Kit

The HALO locker for your Can Am X3 and Defender. Utilizes a push button actuated, electronically ...

The HALO locker for your Can Am X3 and Defender. Utilizes a push button actuated, electronically shifted pin style locker. The X3 and Defender locker both use a 4 pin design for maximum strength and efficiency. The kit also includes a half billet case, a billet motor mount, a chromoly rockwell hardened internal locking gear, and 4140 chromoly components. You will also receive 2 stainless shims to shim your spider gears properly inside the differential.This kit is complete, no other components...

$875.00

Assault Industries XP 1000/Turbo HEAVY DUTY TIE...

Heavy Duty Tie Rods for the Polaris RZR-XP 1000/Turbo. The Heavy Duty Tie Rod kit from Assault In...

Heavy Duty Tie Rods for the Polaris RZR-XP 1000/Turbo. The Heavy Duty Tie Rod kit from Assault Industries will help you relax the worries about breaking parts. Our engineers have focused on parts with strength and integrity while maintaining a more that competitive price point. We also wanted to create a design that was different from everyone else. We devoted time into the design of the radius rods because we didn't want to have the same looking part as everyone else, by doing so.... we've ...

$309.99 $309.99 (5 variants)

ZBROZ Racing Can-Am Maverick X3 X RS "Dune/Dese...

Unleash full power over rough desert terrain and full control as you conquer the terrafrrma of yo...

Unleash full power over rough desert terrain and full control as you conquer the terrafrrma of your choice. Our Dune/Desert Spring Kit for the Maverick X3 X RS is the ultimate spring kit for the weekend warrior or full blown desert racing. Triple rate front and rear combos allow for maximum adjustment and improve small as well as large bump performance. Harshness is a thing of the past with this spring kit. Corner faster, Jump farther and blast the whoop sections at mind blowing speeds all wh...

$995.00 $995.00 (2 variants)

ZRP X3 Radius Rod Plate

Adds strength and rigidity to the X3 rear suspension. The stock rear plate is extremely flimsy ca...

Adds strength and rigidity to the X3 rear suspension. The stock rear plate is extremely flimsy causing flex in your rear suspension. This leads to premature component failure! Our plate allows your rear suspension to have a better feel while reducing stress on the radius rod bolts, preventing failures.Billet 6061 Aluminum.Available with optional D-Ring or Receiver Hitch. ( D-Ring and Receiver Hitch only available in Aluminum & Black colors)This upgrade is a must for any X3.

$100.00 $235.00 (6 variants)

Fireball Racing RZR 1000/Turbo Long Travel Kit

**Price Includes Standard Colors Although Additional Charges May Apply For Custom Colors**Make yo...

**Price Includes Standard Colors Although Additional Charges May Apply For Custom Colors**Make your RZR 1000/Turbo the ultimate machine with this 100% Manufactured, engineered and designed by Fireball Racing Long Travel Kit. Fireball Racing has been proven to make some of the best racing suspension since 1986 and 100% American made. **7" Wider with this kit**Fireball Racing RZR1000/Turbo Long Travel Suspension Kit including -3.5"+Front Upper and Lower control armsFits the 2014-2018 RZR 1000 &...

$3,699.00 $3,699.00 (100 variants)

Assault Industries XP 1000/Turbo HEAVY DUTY TIE...

Features & BenefitsFits Polaris RZR XP 1000/TurboImproved Strength and Rigidity over OEMDirec...

Features & BenefitsFits Polaris RZR XP 1000/TurboImproved Strength and Rigidity over OEMDirect Bolt-on ReplacementSmooth Barrel DesignMade from High Strength 6061 T6 Aircraft-Grade AluminumCNC Machined for Precision and AccuracyDurable Hard Anodized Black FinishMade in the USADescriptionThe Assault Industries barrel style heavy duty tie rod kit for the Polaris RZR XP 1000 is made from high strength 6061 T6 aircraft-grade aluminum and is designed and manufactured in the USA. This kit elimi...

$279.99 $279.99 (2 variants)

SuperATV Polaris RZR XP Turbo Heavy Duty Axles ...

Why Rhino 2.0Experience the Rhino Revolution. SuperATV takes over 10 years of axle and suspension...

Why Rhino 2.0Experience the Rhino Revolution. SuperATV takes over 10 years of axle and suspension experience and delivers to you the next generation of Rhino Axles – Rhino 2.0. What can 100% stronger do for you? This revolutionary axle gives you confidence to tackle the toughest of terrains without the ping of overspending. Rhino 2.0 is unmatched in the heavy-duty axle segment with its winning combination of maximized CV and components and SuperATV’s proprietary mixture of materials and heat ...

$224.95 $859.80 (5 variants)

SuperATV Polaris RZR XP 1000 Heavy Duty Axles -...

Why Rhino 2.0 Experience the Rhino Revolution. SuperATV takes over 10 years of axle and suspensio...

Why Rhino 2.0 Experience the Rhino Revolution. SuperATV takes over 10 years of axle and suspension experience and delivers to you the next generation of Rhino Axles – Rhino 2.0. What can 100% stronger do for you? This revolutionary axle gives you confidence to tackle the toughest of terrains without the ping of overspending. Rhino 2.0 is unmatched in the heavy-duty axle segment with its winning combination of maximized CV and components and SuperATV’s proprietary mixture of materials and heat...

$224.95 $224.95 (7 variants)

ZRP HIGH CLEARANCE HEAVY DUTY RADIUS ROD SET (4)

ZRP HIGH CLEARANCE HEAVY DUTY RADIUS ROD SETNote: If you ride in muddy conditions, or live in a h...

ZRP HIGH CLEARANCE HEAVY DUTY RADIUS ROD SETNote: If you ride in muddy conditions, or live in a humid region it is recommended that you upgrade to the Zinc-Chromate plated Heim Joints.ZRP is proud to announce the launch of the strongest, lightest and highest ground clearance Radius Rod Kit available for the Polaris RZR XP 1000 and RZR XP 1000 Turbo. Introducing the all new MAX series RZR Radius Rod Kit. Meticulously engineered and crafted from the finest materials, these Radius Rods eliminate...

$510.00 $550.00 (10 variants)

SuperATV Polaris RZR XP Turbo Long Travel Axles...

Why Rhino 2.0Experience the Rhino Revolution. SuperATV takes over 10 years of axle and suspension...

Why Rhino 2.0Experience the Rhino Revolution. SuperATV takes over 10 years of axle and suspension experience and delivers to you the next generation of Rhino Axles – Rhino 2.0. What can 100% stronger do for you? This revolutionary axle gives you confidence to tackle the toughest of terrains without the ping of overspending. Rhino 2.0 is unmatched in the heavy-duty axle segment with its winning combination of maximized CV and components and SuperATV’s proprietary mixture of materials and heat ...

$224.95 $224.95 (2 variants)

Fireball Racing Yamaha YXZ 1000 Long Travel Kit

**Price Includes standard colors although custom colors are additional cost**Complete Chromoly ki...

**Price Includes standard colors although custom colors are additional cost**Complete Chromoly kit including Front Upper and Lower control arms, rear Upper and Lower control arms,tie rods, 300M axles and everything you need to install it. Spherical Hiem Ball Joints. 300M stem and chromolly cage. Dust boot is US made and uses a circlip to keep it from moving. 10x stronger then OEM ball joints. (kit utilizes factory shock so a revalve and respring would be recommended)

$3,699.00 $3,699.00 (36 variants)

SuperATV Polaris RZR XP 1000 Wheel Spacer

Polaris RZR XP 1000 Wheel Spacer4/156 mm bolt pattern 1 pair (2 spacers total) Stud Size : 12mmx1...

Polaris RZR XP 1000 Wheel Spacer4/156 mm bolt pattern 1 pair (2 spacers total) Stud Size : 12mmx1.5 Give your machine increased stability with a new pair of Wheel Spacers from SuperATV. Constructed of 6061 aluminum, these spacers are Built for BattleTM and guaranteed to last!FITMENT Polaris RZR XP 1000 : 2014+ Polaris RZR 1000 S : 2016+ Polaris RZR XP 4 1000 : 2014+ NOTE: These will only fit these models. They will NOT fit other Polaris Models. All other Polaris Models come with smaller stu...

$79.95 $89.95 (3 variants)

SuperATV Polaris RZR XP 1000 RackBoss Heavy Dut...

Polaris RZR XP 1000 RackBoss Heavy Duty Rack and Pinion Tackle the trails with confidence! Let Su...

Polaris RZR XP 1000 RackBoss Heavy Duty Rack and Pinion Tackle the trails with confidence! Let SuperATV's RackBoss rack and pinion system steer you in the right direction. Designed to withstand extreme abuse from massive tires, monster whoops, and the toughest of terrains. Riding can wreak havoc on your steering system. Forget dealing with sloppy steering and upgrade to the industry's leading steering assembly - RackBoss. SuperATV spared no details with RackBoss and worked tie rod end to tie ...

$299.95 $324.95 (2 variants)

Assault Industries Heavy Duty Sway Bar End link...

Features & BenefitsHighly adjustableDesigned for Can-Am Maverick X3Improved rigidity over OEM...

Features & BenefitsHighly adjustableDesigned for Can-Am Maverick X3Improved rigidity over OEM linksReduced lateral suspension slopMachined from high-grade materialsLightweight & heavy dutyRugged chromoly heim jointsHard anodized black with laser markingMade in the USADescriptionAssault Industries Heavy Duty Sway Bar End Links for Can-Am Maverick X3 are lightweight, rugged and fully adjustable. These end links are designed to replace the more flimsy OEM units and provide improved handl...

$134.99 $134.99 (3 variants)

Assault Industries Barrel Style +4" Long Travel...

Features & BenefitsFits Polaris RZR XP 1000Works with +4" HCR long travel kitImproved strengt...

Features & BenefitsFits Polaris RZR XP 1000Works with +4" HCR long travel kitImproved strength and rigidity over OEMDirect bolt-on replacementSmooth barrel designMade from high strength 6061 T6 aircraft-grade aluminumCNC machined for precision and accuracyDurable hard anodized black finishMade in the USADescriptionThe Assault Industries barrel style +4" heavy duty tie rod kit for the Polaris RZR XP 1000 UTV with aftermarket long travel kit is made from high strength 6061 T6 aircraft-grade...

$319.99

ZRP X3 Heavy Duty Wheel Studs (4)

Made from precision machined 17-4 Stainless steel.These studs are an amazing 150% stronger than t...

Made from precision machined 17-4 Stainless steel.These studs are an amazing 150% stronger than the stock wheel studs and are designed to work with stock wheel hubs as well as our ZRP Heavy Duty Wheel Hubs for the ultimate setup. Priced per wheel, so you will need 4 sets to do all four wheels on your X3.

$65.00

Sandcraft CAN-AM X3 Limit Strap Kit

DescriptionOur Off-road limiting straps protect your axles & suspension components by prevent...

DescriptionOur Off-road limiting straps protect your axles & suspension components by preventing the over extension of your CAN-AM X3 suspension. Our easy to install kit allows to cushion the drop and protect the shocks, cv’s/axles, & steering components from damage caused by over extension. Don’t let your axles pop out of the differentials EVER AGAIN!

$350.00

SuperATV Polaris RZR 1000 AtlasPro High Clearan...

Polaris RZR XP 1000 AtlasPro High Clearance Boxed A-ArmsWhy We Make ItUnmatched strength, style, ...

Polaris RZR XP 1000 AtlasPro High Clearance Boxed A-ArmsWhy We Make ItUnmatched strength, style, and performance. Engineered to deliver all out strength, we've taken our traditional and made it exceptional with SuperATV's AtlasPro High Clearance Boxed A Arms. Each arm is constructed of a precise blend of materials then hand welded, making them 4x stronger than stock! Through our unique dual bend design, SuperATV arms give you an additional 1.5" of coveted ground clearance, taking you over obs...

$649.95 $649.95 (10 variants)

Fireball Racing 2017 XP Turbo RZR Long Travel Kit

**Price Includes Standard Colors Although Additional Charges May Apply For Custom Colors**Make yo...

**Price Includes Standard Colors Although Additional Charges May Apply For Custom Colors**Make your RZR 1000/Turbo the ultimate machine with this 100% Manufactured, engineered and designed by Fireball Racing Long Travel Kit. Fireball Racing has been proven to make some of the best racing suspension since 1986 and 100% American made. **7" Wider with this kit**Fireball Racing RZR1000/Turbo Long Travel Suspension Kit including -3.5"+Front Upper and Lower control arms3.5"+Rear trailing armsFull L...

$3,699.00 $3,699.00 (32 variants)

ZRP X3 High Clearance Billet Radius Rod Set (6)...

Set of 6 High Clearance Radius Rods for the Can Am X3.

Set of 6 High Clearance Radius Rods for the Can Am X3.

$800.00

Sandcraft Can-Am X3 Carrier bearing 2 Seater

Sandcraft Motorsports has once again raised the bar! With over 1 year of testing we are proud to ...

Sandcraft Motorsports has once again raised the bar! With over 1 year of testing we are proud to announce the brand new GEN3 carrier bearing. We have created and patented this new design to be a GREASABLE bearing while having 3 layers of protection to keep dirt, sand, mud, and water out. Our all new auto set angle & 2 piece design will lower installation time dramatically. Auto set angle has never been easier. It allows you to press the bearing onto the shaft and install with minimal effo...

$240.00 $262.00 (2 variants)

RAGE FAB X3 Rear Bumper and Hitch Receiver

X3 Rear Bumper for Can Am X3, with Hitch receiver is a perfect match for our X3 front bumper. Th...

X3 Rear Bumper for Can Am X3, with Hitch receiver is a perfect match for our X3 front bumper. The Rage Fab X3 rear bumper has, at it’s heart, our X3 receiver hitch. So, you get both a great looking and very functional bumper and a Hitch, for towing, pulling, tie down and more! Both parts are solid steel construction and finished with powder coat, for a lasting and great looking product. In addition, the hitch receiver acts as a reinforcement for the rear radius arms, and it accepts a t...

$339.00 $399.00 (12 variants)

Sandcraft Polaris RZR Steering Rack Stabilizer

Our newest edition to the Sandcraft product family!This part alleviates all stress on the steerin...

Our newest edition to the Sandcraft product family!This part alleviates all stress on the steering rack and will 100% be the last steering upgrade anyone could ever need.Our R&D on this part has been ongoing for over 2 years now with thousands of actual RACE miles along with zero issues.***PATENT PENDING***

$750.00 $810.00 (6 variants)

Assault Industries Heavy Duty Sway Bar End Link...

Features & BenefitsDesigned for Polaris RZR XP 1000 UTV'sHighly adjustableImproved rigidity o...

Features & BenefitsDesigned for Polaris RZR XP 1000 UTV'sHighly adjustableImproved rigidity over OEM end linksReduced lateral suspension slopMachined from high-grade materialsLightweight and heavy dutyRugged chromoly heim jointsHard anodized black with laser markingMade in the USADescriptionAssault Industries Heavy Duty Sway Bar End Links for Polaris RZR XP 1000 are lightweight, rugged and fully adjustable. These end links are designed to replace the more flimsy OEM units and provide impr...

$129.99

SuperATV Can-Am Maverick X3 Heavy Duty Axles - ...

Why Rhino 2.0 SuperATV's Rhino 2.0 axles will change the way you ride. If you’re rolling in a Can...

Why Rhino 2.0 SuperATV's Rhino 2.0 axles will change the way you ride. If you’re rolling in a Can-Am Maverick X3 you know you’re going to push your machine to the limits—huge dunes, extreme hills, and whole lotta speed. If you don’t have a high standard for axles, you’ll spend more time crawling with a busted CV than with your foot to the floor. That’s why you need SuperATV’s Rhino 2.0 axles. Built with over 10 years of axle and suspension experience, these axles are the toughest we've ever m...

$224.95 $224.95 (8 variants)

ZOLLINGER RACING 7075 X3 Double Shear Rear Knuc...

Here is the ultimate fix to middle radius rod/rear knuckle problem on the Cam Am X3.We have built...

Here is the ultimate fix to middle radius rod/rear knuckle problem on the Cam Am X3.We have built an all billet rear knuckle that puts the middle radius rod in double shear and if that wasn't enough we added an ARP bolt for ultimate strength. We eliminated stress risers and added cross section in all the right spots to make this part truly race proven.Our knuckle come installed with high end, teflon lined, spherical bearings. These will not wear out like the stock pivots.Additionally, we have...

$750.00 $1,640.00 (4 variants)

Assault Industries Barrel Style +4" Long Travel...

Features & BenefitsFits Polaris RZR Turbo 2017 ONLYWorks with +4" HCR long travel kitImproved...

Features & BenefitsFits Polaris RZR Turbo 2017 ONLYWorks with +4" HCR long travel kitImproved strength and rigidity over OEMDirect bolt-on replacementSmooth barrel designMade from high strength 6061 T6 aircraft-grade aluminumCNC machined for precision and accuracyDurable hard anodized black finishMade in the USADescriptionThe Assault Industries barrel style +4" heavy duty tie rod kit for the Polaris RZR Turbo 2017 UTV with aftermarket long travel kit is made from high strength 6061 T6 air...

$329.99

ZRP X3 Desert Series Tie Rod

We have built the ultimate tie rod setup for the Can Am X3.These tie rods feature a large diamete...

We have built the ultimate tie rod setup for the Can Am X3.These tie rods feature a large diameter 7075 tie rod body with a 17-4 clevis, 17-4 custom made hardware and high strength heim joints. Easily the best tie rods available these are a must for any racer or aggressive driver.

$400.00 $400.00 (2 variants)

SuperATV Polaris RZR XP Turbo Axles - Rhino Brand

Polaris RZR XP Turbo Heavy Duty Axle Replaces OE #: Front : 1333434 Rear : 1333718 Setting the ba...

Polaris RZR XP Turbo Heavy Duty Axle Replaces OE #: Front : 1333434 Rear : 1333718 Setting the bar high, Rhino Brand Axles are made from heavy-duty 4340 chromoly steel, one of the industry's strongest materials. With an excellent strength-to-weight ratio, Rhino Brand Axles are Built for Battle! These axles exceed expectations and deliver performance not found in OEM or other aftermarket axles. Each CV and Shaft is maximized for ultimate strength. Rhino Brand Axles spare no details and are pac...

$199.95 $199.95 (2 variants)

Assault Industries Barrel Style Heavy Duty Tie ...

PRE-ORDER TODAY!Call for more informationFeatures & BenefitsFits Can-Am Maverick X3Improved S...

PRE-ORDER TODAY!Call for more informationFeatures & BenefitsFits Can-Am Maverick X3Improved Strength and Rigidity over OEMDirect Bolt-on ReplacementSmooth Barrel DesignMade from High Strength 6061 T6 Aircraft-Grade AluminumCNC Machined for Precision and AccuracyDurable Hard Anodized Black FinishMade in the USADescriptionThe Assault Industries barrel style heavy duty tie rod kit for the Can-Am Maverick X3 is made from high strength 6061 T6 aircraft-grade aluminum and is designed and manufa...

$269.99