RZR XP4 1000 Performance

Evolution Powersports RZR XP 1000 Stage 3 14hp ...

Product DescriptionEvolution Powersports Stage Tuned Performance for the Polaris RZR 1000 is here...

Product DescriptionEvolution Powersports Stage Tuned Performance for the Polaris RZR 1000 is here! Tuning began with a bone stock RZR 1000 which was meticulously baselined on our Mustang SE 550 Dyno & Dynojet 250ix. From there, timing, rev limits and fueling were changed to maximize power on 91 Octane fuel. Then different exhaust and intake designs were tested and refined. Once maximum power was realized with each stage, the fueling was corrected in the ecu. This makes for a 100% plu...

$1,234.05 $1,639.05 (60 variants)

S&B REPLACEMENT FILTER FOR 2014-2018 POLARIS RZ...

FILTER TYPE  DRY CLEANABLE FILTER MAINTENANCE CLEANING THIS FILTER IS AS EASY AS 1, 2, 3 If y...

FILTER TYPE  DRY CLEANABLE FILTER MAINTENANCE CLEANING THIS FILTER IS AS EASY AS 1, 2, 3 If you don't have our Particle Separator installed, than your filter will start to look like this after a couple rides protecting your engine. No worries though, our new RZR filter is super easy to clean. Just follow the steps below to breathe new life into your dirty filter. If the filter media or rubber looks damaged, do not re-use. FLANGE ID 2.95" FLANGE HEIGHT 1.15" TOP WIDTH 5.5" BASE WID...

$75.00

EVOLUTION POWERSPORTS POLARIS RZR 1000XP ECU RE...

Evolution Powersports has released its long anticipated Polaris RZR 1000 Programming. Huge horsep...

Evolution Powersports has released its long anticipated Polaris RZR 1000 Programming. Huge horsepower gains have been realized through timing, fueling and torque limit modifications, rev limits, etc. We also build additional safety into our tune by lowering the fan on temperature by 20 deg F. The OEM fan on temperature is is too high (well over 200 deg F). In addition the fan on/off temperatures can be set for each customer depending upon where they live and the conditions typically ridden in...

$379.05 $426.55 (30 variants)

Evolution Powersports RZR XP TURBO, TURBO S AND...

Description BAD ASS “Extreme” Belt (EX)This is the belt that set the industry standard for extrem...

Description BAD ASS “Extreme” Belt (EX)This is the belt that set the industry standard for extreme performance and reliability. This belt changed our driving habits and allowed us to drive our vehicles to the limit without the fear of premature belt failure. The EX belt is built for the extreme abuse of the trail / mud riders that need a ton of belt squeeze to stop from slipping the belt. The specific compounds in this belt make the engagement quicker while lowering the peak engine operating ...

$141.55 $149.00

Energy Coil RZR 1000/1000 TURBO | 2013-2018

Enhance the performance of your RZR-1000 with Energycoil. Complete plug and play system that repl...

Enhance the performance of your RZR-1000 with Energycoil. Complete plug and play system that replaces factory coil and plug wires with our coil on plug technology. Increased throttle response combined with a smoother idle that you feel and hear. Mid range acceleration and power increase with a faster acceleration rate all the way to the limiter. No more cutting out or rpm fluctuation up top just smooth steady power. By having a hotter longer duration spark it ensures a more complete burning c...

$389.00

S&B Particle Separator, 2014-16 Polaris RZR 100...

S&B FILTERS PARTICLE SEPARATOR FOR THE 2014-2016 RZR XP-1000 Maintain Power. Most stock filt...

S&B FILTERS PARTICLE SEPARATOR FOR THE 2014-2016 RZR XP-1000 Maintain Power. Most stock filters on the newer UTVs do a good job at stopping the dirt, but they clog very quickly robbing your engine of the power it needs to make it up that tall dune, keep up with your friends or stay ahead at the end of the race. The stock system reaches capacity after only 74 grams of dust. With the Particle Separator, 2,536 grams of dust can be ingested before your filter needs to be changed.* Stock filt...

$399.00 $448.00 (4 variants)

Evolution Powersports Maptuner X Mounts & Cases

EVP has created a rugged billet anodized aluminum weather resistant case for our Maptuner X platf...

EVP has created a rugged billet anodized aluminum weather resistant case for our Maptuner X platform. Not only does it protect your Maptuner X, it looks absolutely stunning! We are packaging our case with top quality RAM mounting system components which are the industry standard for quality and durability. Our 90 Deg HDMI cable allows Maptuner X to be mounted lower to the dash and better hides the power/communication cable. Choose the mounting system that works best for your vehicle. Maptuner...

$28.49 $195.68 (24 variants)

Polaris RZR 900/1000/XP Turbo ARP Cylinder to H...

POLARIS RZR 900/1000/XP Turbo ARP Cylinder to Head Stud KitFits all years of Polaris RZR 900, 100...

POLARIS RZR 900/1000/XP Turbo ARP Cylinder to Head Stud KitFits all years of Polaris RZR 900, 1000, and XP TurboThis kit includes ALL 8 fasteners on head.These bolts offer:-Increased torque to 85 FT/ LB-Allen head for easy removal and installation-No drilling or tapping required-Replaces all 8 fasteners. Our Competition only includes 6-Made from 8740 chromoly steelKit Includes:-6 ARP studs-2 ARP Bolts for side of cylinder (other kits do not include these)-6 ARP washers-6 ARP nuts-ARP fastener...

$149.00

Gates Carbon RZR-1000 EPI Severe Duty CVT Drive...

Double cog style belt helps reduce clutch heat.Aramid tensile cord (non-cotton) will provide high...

Double cog style belt helps reduce clutch heat.Aramid tensile cord (non-cotton) will provide higher load capabilities and less slip.Higher quality belt with a consistency of closer tolerances.Exacting specifications, measurements and dimensions provide a consistent clutch operation.Remember: if you are continually blowing belts, your clutches are getting too hot. Improving your clutching with a clutch kit will decrease belt slippage and decrease belt heat.Modifications to the original equipme...

$124.99 $124.99 (3 variants)

Gates G-Force RZR-1000 /900 CVT Belt - (2014 a...

Gates G-Force CVT drive belts deliver proven results for today’s recreational and utility all-ter...

Gates G-Force CVT drive belts deliver proven results for today’s recreational and utility all-terrain equipment. Designed for superior fit, performance and durability, G-Force requires zero clutching adjustments at installation. Whether trail riding, farming, ranching or extreme riding, G-Force belts are engineered for demanding off-road conditions. Just drop in a G-Force belt and be on your way for work or play.Dynamometer testing proves G-Force belts outlast other high-performance belts by ...

$69.99 $69.99 (4 variants)

SLP Heavy Duty Outer Rollers for Polaris RZR Mo...

New SLP Rollers for RZR Tied Secondary Clutches now available. These rollers are made of a very d...

New SLP Rollers for RZR Tied Secondary Clutches now available. These rollers are made of a very durable, self lubricating poly material that provides over 3 times longer roller life! Sold per each.

$24.95

Gates G-Force RZR-1000 C-12 CVT Belt

Gates continues to lead the way in CVT belt innovation, technology and development for today’s re...

Gates continues to lead the way in CVT belt innovation, technology and development for today’s recreational and utility all-terrain equipment with the latest addition to the G-Force® line, the All-New G-Force® C12® CVT Belt.This belt is engineered for drop-in performance, featuring exceptional strength, flexibility, and durability.The first CVT belt utilizing a carbon tensile cord, combining minimal stretch with extraordinary strength.High performance neoprene with a trapezoidal top-notch and...

$114.99 $120.00

Evolution Powersports Hi-Flow Direct Replacemen...

* Currently Back ordered - ETA unknown at this time. For inquiries please call or email 801-674-2...

* Currently Back ordered - ETA unknown at this time. For inquiries please call or email 801-674-2451 sales@kombustionmotorsports.com * The EVP Polaris RZR XP Turbo V-Flow High Performance Air Filter System is a Direct-Fit Replacement air filter for the OEM Filter. Our intake system fits within the factory air box and attaches with a clamp to the airbox. Our higher flowing air filter systems offer significant improvements in air flow, filtration with up to 2 HP increase over stock. This is esp...

$109.24 $114.99

SLP 2016-18 RZR XP 1000 Clutch Kits

SLP clutch kits have been designed and tested to get the most consistent performance out of your ...

SLP clutch kits have been designed and tested to get the most consistent performance out of your Polaris UTV. We have been working with centrifugal clutches for over 40 years, and know how to tune them to transfer your horsepower to the ground. In most cases, optimizing the clutch setup is the best performance gain for the dollar spent. Through our testing we have found two distinctly different clutch setups depending on what type of terrain that you drive on.SLP Trail Clutch kit:These kits a...

$340.04 $340.04 (8 variants)

SLP Heavy Duty Square Slider Replacement Roller...

These new Heavy Duty rollers replace the square slider blocks in the 2016 and newer B.O.S.S. seco...

These new Heavy Duty rollers replace the square slider blocks in the 2016 and newer B.O.S.S. secondary clutch. They reduce friction and wear on the clutch, resulting in longer clutch life and more consistent performance. Made from a very durable self-lubricating poly material for long life. Sold per each.

$27.50

Power Pucks™for 2016-18 Polaris Turbo

These Power Pucks™ decrease friction and increase power to the ground in the RZR Turbo drive clut...

These Power Pucks™ decrease friction and increase power to the ground in the RZR Turbo drive clutch for more efficient shift. They eliminate the binding that happens when dirt or sand gets into the clutches. This results in a substantial increase in response and consistency with smooth power delivery. They are so effective that we have included them in all of our RZR Turbo clutch kits. Sold per set of 6. The Right Stuff elastomeric rubber is required for installation

$79.95

Evolution Powersports POLARIS RZR 1000XP CLUTCHING

EVP has worked extensively with Quad Shop Customs to create custom clutch kits to match our tunin...

EVP has worked extensively with Quad Shop Customs to create custom clutch kits to match our tuning. All of our kits come set up out of the box, but come with components that allow adjust ability for future upgrades and or racing.

$284.05 $284.05 (5 variants)

SLP Belt Removal/Clutch Compression Tool

This tool makes belt removal and replacement a breeze. Machined from billet aluminum for strengt...

This tool makes belt removal and replacement a breeze. Machined from billet aluminum for strength and durability, this tool has a specially shaped end that cams over when fully engaged in the driven clutch. This allows the tool to remain engaged in the clutch (compressing the clutch) while the old belt is removed and the new belt is replaced. Also, this tool has a wide footprint and because it is made of aluminum it doesn't tend to mar the clutch in the contact area like other tools used f...

$32.95 $45.90 (4 variants)

SLP Drive Clutch Puller Tool

This clutch puller is designed to pull even the toughest of clutches. Made of high quality heat t...

This clutch puller is designed to pull even the toughest of clutches. Made of high quality heat treated material, this tool is built to last.

$39.95

ZRP RZR LW Billet Clutch Cover: RZR 1000, 900, 800

Polaris RZR LW Billet Clutch CoverFits: 2014-17 RZR 1000, 2011-17 RZR 900, and 2008-14 RZR 800. D...

Polaris RZR LW Billet Clutch CoverFits: 2014-17 RZR 1000, 2011-17 RZR 900, and 2008-14 RZR 800. Does NOT fit TURBO models.Polaris P-85 Clutch Cover: Designed using high strength 7075 aluminum with reinforced crossed sections. Now includes a Hardened Clutch Shim for improved backshift and spring longevity. 105g lighter than stock clutch cover!Stronger and more rigid than stock allowing for more efficient shifting.Open face design dissipates heat lowering belt temperatures.Reduced rotational in...

$225.00

KRAFTWERK RZR XP1000 14-17 SUPERCHARGER KIT

The Kraftwerks Performance RZR XP® Supercharger System is engineered to produce the ultimate in p...

The Kraftwerks Performance RZR XP® Supercharger System is engineered to produce the ultimate in powered performance for Polaris RZR riders. Whether it’s loose sand, dusty trails or steep rock climbing, Kraftwerks Performance knows that power is the name of the game.The heart-pounding system delivers over 150hp and 110+ lb-ft. of torque – that’s increased horsepower and torque vs. the stock RZR. This easy to install, bolt-on system features a compact Rotrex C15-60 unit with a CNC billet mount ...

$3,999.95 $4,194.99

SLP Clutch Press Tool

The SLP Clutch Press Tool has been widely accepted as the most efficient clutch compression tool ...

The SLP Clutch Press Tool has been widely accepted as the most efficient clutch compression tool available. This revolutionary drive and driven clutch servicing tool has been re-designed specifically for compressing and holding springs for ease of assembly and disassembly. This tool is specified in many factory repair manuals as a required specialty tool for clutch compression. Wrestling with the clutch or need for a second person to help is now history. Made compact, the SLP tool can be used...

$119.95

STV Motorsports Clutch Alignment Tool

The STV MOTORSPORTS® clutch alignment tool is a must have tool that will SAVE your weekend ride!...

The STV MOTORSPORTS® clutch alignment tool is a must have tool that will SAVE your weekend ride! The spacing issues between the primary and secondary shafts can result in poor clutch performance and will cause belt failure. Motor and trans will automatically fall out of alignment, this tool can save up to $1000 in belts! This tool is also a must when motor and transmission are detached. 100% MADE IN USA   PLEASE CHECK BELOW TO VERIFY WHICH TOOL YOU WILL NEED. PT1: 2015 SPORTSMAN 570 2014 ...

$39.99 $39.99 (4 variants)

Aem X-Series Boost / Fuel Pressure Gauge 0~15PSI

AEM’s 30-0309 X-Series 0~15PSI Digital Boost/Fuel Pressure Display gauge combines incredible look...

AEM’s 30-0309 X-Series 0~15PSI Digital Boost/Fuel Pressure Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost or fuel pressure readouts up to 15 PSI in their high performance supercharged or carbureted vehicle.NOTE: The 30-0309 comes with a black bezel and reversible black PSI Boost/Fuel Pressure faceplate. You will need to purchase the optional 30-0309-ACC accessory kit to get the ...

$209.30

Aem X-Series Boost Pressure Gauge -30~60psi / -...

AEM’s 30-0308 X-Series -30in/Hg~60PSI / -1~4BAR Digital Boost Display gauge combines incredible l...

AEM’s 30-0308 X-Series -30in/Hg~60PSI / -1~4BAR Digital Boost Display gauge combines incredible looks, increased readability and a multitude of new, easy-to-use features! It is a must for users who want highly accurate boost pressure readouts up to 60 PSI or 4 BAR in their high performance vehicle.NOTE: The 30-0308 comes with a black bezel and reversible black PSI/BAR boost pressure faceplate. You will need to purchase the optional 30-0308-ACC accessory kit to get the silver bezel and reversi...

$272.13

Polaris RZR XP 1000 Radiator

The RZR 1000 Replacement radiator takes your RZR a step up in performance and reliability, while ...

The RZR 1000 Replacement radiator takes your RZR a step up in performance and reliability, while utilizing the stock mounting location and fans. Featuring a 55mm core and 14 fins per inch, you get a massive 20% gain in coolant capacity. Also, by utilizing a triple pass design that allows coolant to pass through the radiator 3 times, we have seen temperature drops of as much as 25 degrees during testing in the most demanding conditions. Easily outclassing the stock radiator which has a 32mm si...

$559.00

Boondocker RzR 1000 Turbo System

BoonDocker Turbo Systems are designed, built and tested with the highest in reliability, quality ...

BoonDocker Turbo Systems are designed, built and tested with the highest in reliability, quality and performance in mind. All of these factors were carefully thought through while developing a XP 1000 Turbo System that will work for everyone.Your RZR XP 1000 Turbo System was designed to fit under all the stock plastics to retain bed space and allow for aftermarket add ons. This turbo system exhausts through the stock muffler and makes your BD Turbo a quiet comfortable sleeper, but if you wa...

$5,725.00 $7,723.00 (12 variants)

SandCraft RZR 1000 & TURBO Motor Mount Tube

Race proven design to strengthen the front of the motor. Reducing movement under high stress situ...

Race proven design to strengthen the front of the motor. Reducing movement under high stress situations which leads to potential harmful movement that can and will cause damage to your drivetrain. We added the top of the line materials with over double the wall thickness to ensure stability when under a load. Don’t be left in the dust with a broken motor or mount and potential frame damage and order one today!

$170.00

SLP Drive Clutch Spider Tool

This Spider Tool allows the spider assembly in the drive clutch to be removed and assembled in or...

This Spider Tool allows the spider assembly in the drive clutch to be removed and assembled in order to service the rollers and buttons. It is made of high quality steel to precise specifications allowing you to remove or install even the most stubborn spiders easily.

$59.95

SLP Drive Clutch Sheave Clamp Tool

The sheave clamp tool holds the moveable sheave of the drive clutch in place when collapsed for c...

The sheave clamp tool holds the moveable sheave of the drive clutch in place when collapsed for changing clutch weights without removing outer cover or clutch from crankshaft. An absolute must for field tuning.

$10.95